Steps To Replace A Toilet Flush Valve
When ensuring a complete sanitation to your home, plumbing assignments such as replacing a broken toilet flush valve, cannot be left pending. This would completely hurt the sanitation schema of your toilet and bathroom. Instead of availing the services of a plumber straightaway, take the assignment in your own hands.
Before you look to replace the faulty flush valve with a new one, try diagnosing the flaw in the valve and evaluate if it can be fixed. If the fault seems to be irreparable then move to the replacement job of the flush valve.
Foremost thing to do before commencing any plumbing project is to notify yourself about the availability of the required plumbing tools. Do you have all those essential plumbing tools such as wrenches, screwdrivers, Teflon tape etc. in tact ? Also make sure that you’ve turned off the main water supply prior to the repair work.
Flush the toilet tank and if it doesn’t flush properly then open the lid of the tank and take out water with the help of a small container. Use a wet or dry rag to to clean out the tank completely. Once tank is emptied, locate a valve chain that is clipped to a trip arm. Detach the valve chain from the trip arm and expose the underlying setup.
Now move to the actual task of detaching the old or broken flush valve from the toilet fixture. Simply lift the valve or the flapper from the flush valve seat by detaching the clips (on the side) from the overflow tube. The method of detachment of the flush valve varies depending on the type of flush valve you’re using. Once the flush valve is completely detached from the setup, make way for a new flush valve. Make sure that the new flush valve is similar to the old one in terms of the flapper style and the adjoining clips.
Install the new flush valve by resting it on the flush valve seat and attaching the side clips to the overflow tube such that the flush flapper fits well on the flush valve seat.
Attach the valve chain to the trip chain again and finish off the installation of the new flush valve.
Turn off the water supply valve situated at the bottom of the tank. Examine the flush valve and the affiliated setup for it’s normal operation.
Scott Rodgers is a noted writer who has been providing great guidance on plumbing works all over the country. His incredible expertise has, in fact, sparked significant rise in revenue for talented plumbers across the nation, from Dunn Loring Plumbers (Need one? click here!) to Krum Plumbers (Need one? click here!).







